GRABO®'s Technology And Technical Specification
GRABO® innovators work with a huge variety of unique technological patents. To lead the market, our team ensures our products offer cutting-edge convenience, power and accessibility. Below, we will take a detailed glance at some leading technical capabilities of our most popular tools, lines and other services.
GRABO® PRO-Lifter 20 Specs
Power System & Runtime
Battery platform
14.8VDC 2600mAh Li-ion
Charger input voltage
100-240VAC 50/60Hz
Battery charging time
~2 hrs
Non-stop running time (full charge)
1.5 hrs
Running cycles (full charge)
900 ON-OFF cycles of 10 seconds
Stand-by mode (charge hold)
30 days
Handling Dimension and Capacity
Length
11.77 in (300 mm)
Width
7.22 in (184 mm)
Height
4.76 in (121 mm)
Weight (with battery)
3.2 lbs (1.5 kg)
Working Load Limit (WLL)
265 lbs (120 kg)
Max Lift
375 lbs (170 kg)
Pump & Vacuum Performance
Brushless pump output
16W rated power
Air flow
0.7 cfm (20 L/min)
Vacuum control
Max vacuum 11.6 psi (0.8 bar / 80 kPa); pump stops automatically at max
Pump service life
100,000+ ON-OFF cycles / 800+ hrs continuous
|
Material
|
Perpendicular Hold
|
Parallel Hold
|
|---|---|---|
| Glass | 375 Lbs (170 kg) | 265 Lbs (120 kg) |
| Ceramic Tiles | 375 Lbs (170 kg) | 265 Lbs (120 kg) |
| Metal | 242 Lbs (110 kg) | 242 Lbs (110 kg) |
| Plastic | 220 Lbs (100 kg) | 220 Lbs (100 kg) |
| Wood | 220 Lbs (100 kg) | 143 Lbs (65 kg) |
| Rough Slate | 176 Lbs (80 kg) | 176 Lbs (80 kg) |
| Rough Concrete | 176 Lbs (80 kg) | 176 Lbs (80 kg) |
| Dry Wall | 165 Lbs (75 kg) | 143 Lbs (65 kg) |
Operating & Compatibility
Working temperature
32°F – 140°F (0°C – 60°C)
Applicable surface type
Peak/valley heights < 0.1 in (3 mm), arc < 5°
Additional features
Model/SKU: GP-1Li-FB. Pump stops automatically at maximum vacuum rate (11.6 psi / 0.8 bar).
Notice
Based on product information at time of publication; environmental conditions can affect product performance and longevity. Due to the high pressure created with the GRABO® Pro-Lifter 20, do not attempt to attach the tool to glass thinner than 6 mm — damage can occur. Consult the product manual on GRABO<sup>®</sup>.com or contact a Sales Representative for more information.
GRABO® Pro Adhesion To Rough Surfaces
GRABO® Pro suction cup technology offers incredible adhesion to awkward, often unmanageable surfaces. Traditionally, standardised suction cups require clean, flat surfaces for perfect adhesion and hold. For example, airtight panels and glass panes usually fulfil such a brief. GRABO® Pro technology, meanwhile, offers incredible suction and lifting power on etched, rough and otherwise irregular surfaces.
The GRABO® Pro is rated for non-porous and semi-porous surfaces with peak/valley heights up to 3 mm (0.1 in) and an arc under 5 degrees. Therefore, it can work with the vast majority of patterned surfaces such as tiles and various construction standards. Of course, each case will vary and will depend on the exact geometry of roughness on any given surface.
However, the GRABO® Pro commitment to adhesion means you can effectively pick up more than a clean panel or two. Why restrict matters?
.png)
